ADP HE31930A155A000 Uncased A-Coil Evaporator (2.5T, TXV, 15.5"W, Right)


No reviews yet Write a Review
15.50 (in)
13.00 (in)
19.50 (in)


MPN: HE31930A155A000, Brand: ADP, Series: HE, Refrigerant: R-410A & R-22, Material: Copper Slab, Tonnage: 2.5, CFM: 1000, Coil Type: A-Coil, Product Type: Evaporator, Cabinet Depth: Uncased, Case: Uncased, TXV access port: , Width: 15.5", Height: 13", Depth: 19.5", Port Orientation: Right

• High efficiency lanced fin design

• “No-hassle” 5 year warranty.

• R-22, R-410A, AC & Heat Pump compatible.

• All coils have durable packaging with bar coded labels on the box.

• Threaded expansion valves available factory installed or as a field installed kit.

• Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air.

• Piston options include externally accessible body for easy piston change out and/or TXV installation.

• Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan.

• UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer.

• Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans.

• Patented HydroTEC™ low water retention drain pan.

• Copper refrigerant connections for easy brazing on both copper and aluminum slab models.

• Intertek lab tested 1% or less cabinet air leakage for better efficiency.

• Cased coil cabinets are fully lined with 5/8" foil faced insulation.

• Optional painted or embossed galvanized steel cabinets.

• Short cabinet with easy access.

• Non-captive refrigerant lines with long stubs make for easy installation.

• Enhanced refrigerant pipe grommets: secure, tight, and easy to install.

• Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV.

• Expansion valve with improved temperature sensing:

1.) Mounted inside cabinet to prevent external sweating

2.) Bulb clamped standard factory installed • All multi-position coils are upflow, downflow, and left or right airflow capable.

• Cabinet insulation hold down tabs for easy drain pan removal.

• Interlocking doors reduce air leakage and allow for easy access.

• Foam drain seal for reduced air leakage.

• All multi-position coils are field convertible from horizontal right-to-left airflow and horizontal left-to-right airflow.

• Suction line refrigerant connections are 3/4" ODF (A-Coil 18-36 size models) or 7/8" ODF (A-Coil 42-60 size models)

• Suction line refrigerant connections are 1.125" on slab numbers E43, E46, E56, and E65 for size 42 models and higher.

• Corrosion resistant coil header plates.

• All A-Coils are upflow or downflow capable.

WARNING—Face velocity above 350 ft/min. is not recommended for downflow

Extra Information

15.50 (in)
13.00 (in)
19.50 (in)
0.00 LBS